introducing panasonics latest breakthrough in wireless networking, the new pan1326/1316 series rf modules featuring both bluetooth low energy and bluetooth connectivity. this powerful new technology combination creates a low cost, ultra-low power wireless networking solution for short range applications. the bluetooth low energy (ble) standard is designed to reduce power consumption by establishing very fast connections (few ms) and transferring small amounts of data. using these techniques, energy consumption is reduced to a tenth of classic bluetooth. bluetooth low energy devices can be put into a sleep mode and activated for event activities such as sending fles to a gateway, pc or mobile phone. furthermore, the maximum power consumption is less than 15 ma and the average power consumption is about 1 ua. thus, a small coin cell C such as a cr2032 C is capable of powering a device for up to 10 years of operation. the new pan1326/1316 host controlled interface (hci) series also brings texas instruments cc2564, to an easy-to-use module format. panasonics tiny footprint technology offers a module of only 85.5 mm 2 including antenna. the modules are designed to accommodate pcbs pad pitch of 1.3mm and as little as two layers for easy implementation and manufacture. product performance: ? best-in-class bluetooth rf performance (tx power, rx sensitivity, blocking) ? fully qualifed bluetooth v4.0 edr ? dimensions pan1326: 9mm x 9.5mm x 1.8mm (width x length x height) ? dimensions pan1316: 6.5mm x 9mm x 1.7mm (width x length x height) ? certifcations: bluetooth, fcc, ic and ce ? operating temperature range: -20oc to +70oc ? supply voltage range: 1.7 - 4.8v ? profles: spp, a2dp and avrcp ? based upon tis cc2564 ? integrates with tis ultra low-power msp430 microprocessor ? very fast algorithm for both acl and esco ? supports extended range tx power with 10dbm typical output ? low power scan method for page and inquiry scans at 1/3rd normal power pan1326 and pan1316 part numbers: part numbers description ENW-89823A2JF pan1326, cc2564, bluetooth & bluetooth low energy, hci module, antenna enw-89823c2jf pan1316, cc2564, bluetooth & bluetooth low energy, hci module, no antenna development and evaluation part numbers: part numbers description enw-89825a2jf pan1323etu, development module for pan1315, pan1316, pan1317, pan1325, pan1326, pan1327 eval_pan1323 eval_pan1323, development kit for pan1315, pan1316, pan1317, pan1325, pan1326, pan1327 new product introduction copyright ? 2011 panasonic corporation of north america. all rights reserved. specifcations are subject to change without notice. pan1326npi rev. 1.0 , fy11-075-xxx www.panasonic.com/ rfmodules piccomponentsmarketing@us.panasonic.com 1-800-344-2112 new! pan1326/1316 series bluetooth ? low energy rf modules dual-mode wireless bluetooth connectivity and bluetooth low energy p i design and specifcations are subject to change without notice. ask the factory for technical specifcations before purchase and/or use. if there is any doubt regarding the safety of this product, kindly inform us immediately for technical consultation. pan1450 rev. a w ireless m odules the pan1450 provides wireless interface per the bt 1.2 specifcation. interoperability and bt compliance testing have been completed for the bt chip zv4301 from zeevo, inc. to facilate rapid time-to-market. the bt chip incorporates a widely popular 32-bit arm7tdmi tm cpu core with suffcient bandwidth to support a wide range of embedded controller applications and the module provides full arm7 software development access. the pan1450 is manufactured in a 13,4 x 18,7 x 2,2 mm3 smd package and the only external component needed is an 50 ohm antenna. any customizations for the software can be handled with our recommended partners. overview - inquiry results with rssi (1.2) - adaptive frequency hopping (afh) enabled (1.2) - high throughput (>600 kbps) - hold-, park- and sniffmode - up to 128 bit encryption - audio capability on an sco channel - support for very low power modes - sleep and deep sleep - all bluetooth data rates (up to 57,6/723,2kbps) user interfaces - full-speed usb version 2.0 compliant - programmable baud rate uart (9,6 kbps - 921,6 kbps) - debug uart (duart) - 16 general purpose i/os (interruptible) - pcm audio (1 channel) - spi and jtag interface radio features - high sensitivity design (-86 dbm typ.) - integrated rf shield - class 2 module (0dbm typ. output power) - one antenna port features outlines - enw89803j p r o d u c t q u a l i f i e d b l u e t o o t h b01839 bluetooth-module pan1450 cut the cable tm new product introduction new bluetooth low energy
dual-mode wireless bluetooth connectivity and bluetooth low energy new product introduction copyright ? 2011 panasonic corporation of north america. all rights reserved. specifcations are subject to change without notice. pan1326npi rev. 1.0 , fy11-075-xxx www.panasonic.com/ rfmodules piccomponentsmarketing@us.panasonic.com 1-800-344-2112 applications: parameter value condition / notes receiver sensitivity (ber=10 -3 ) -93 dbm gfsk, typical, dirty tx on output power 10 dbm vdd_in = vbat power supply 1.7 - 4.8 v battery or dc/dc ultra low power scan 135 u a 1.28s interval gfsk dh1\dh5 33 ma full throughput operating temperature range -20c to + 70c -40c to + 85c optional technical specifcations for pan1326 and pan1316: interfaces: the pan1326/pan1316 host controlled interface supports several transport layers with the following features: ? uart rates of up to 4mbps ? three and four wire uart transport block diagram pan1326: block diagram pan1316: ? sports and fitness ? heart rate monitor ? blood pressure sensor ? blood glucose meter ? thermometer ? assisted living ? flood alarm ? heating control ? automatic key control ? industrial sensors ? toys ? entertainment devices ? mobile accessories ? all bluetooth wireless applications series description compatibility pan1315 bt classic 100% pin compatible pan1316 bt and ble pan1317 dual mode bt and ant pan1325 bt classic with antenna 100% pin compatible pan1326 bt and ble with antenna pan1327 dual mode bt and ant with antenna bluetooth module pin compatibility: all panasonic bluetooth rf modules are 100% pin compatible with the next generation of bluetooth classic and low energy devices. this unique design feature enables designers to seamlessly transition between bluetooth classic, low energy and ant enabled modules, addressing larger markets and providing migration paths to circumvent obsolescence. new product introduction
|
